Transportation Injuries in Forensic Medicine

Introduction to Transportation Injuries

These injuries are blunt force injuries that happen due to traveling on the ground, air, and water. The most common transportation injuries are motor and pedestrian injuries. Following are the various transportation injuries:

Types of Transportation Injuries

A) Vehicular Injuries

These injuries are blunt force injuries that happen due to traveling on the ground either walking and being hit by some car or simply driving a car and crashing it. Those injured by accidents can be divided into three broad groups that are pedestrians, cyclists (Pedal or motor), and the drivers/passenger of vehicles.

1. Pedestrian Injuries

(i) Primary Impact Injuries

These injuries are produced when any part of the victim first strikes the vehicle. Generally, when an adult is hit by the front of a car, the front bumper will strike the victim at about knee level. This will help to establish the position of the victim and in crime scene reconstruction.

Primary Impact Injuries

The position of the injuries will be further modified by the fact that both feet were on the ground or one was raised, the nature of the surface of the road, and the footwear of the victim.

(ii) Secondary Impact Injuries

These injuries are produced due to an impact between the body part and the vehicle for the second time. The victim after striking against the vehicle is further scooped up/hurled up on the vehicle resulting in injuries to the other parts of the body by the same vehicle.

Secondary Impact Injuries

Here extensive abrasion, bruises, and lacerations may be seen. Compression of the chest, multiple rib fractures, fractures of the spine, and sternum may be seen.

(iii) Secondary Injuries

These injuries are produced when the victim is knocked down by the vehicle and strikes the ground.

Secondary Injuries

Thus, receiving injuries from striking the ground and some objects present on the ground. Fractures of limbs, skull, ribs, etc are very common in secondary injuries.

2. Driver/occupant Injuries

After pedestrians, the driver is the most common casualty in road traffic accidents. Unbelted rear seat occupants are also at increased risk of serious injury. The driver and passenger injuries depend upon the type of impact crash. It can be:

(i) Front Impact

This happens when one car strikes another car or any other stationary object like a pole. In this type of impact, the head strikes the windshield or steering wheel.

Front Impact

The driver may receive fractures of the wrist, tibia, fibula, and pelvis. Further impact against steering wheel will cause fracture of forehead and skull.

(ii) Rear impact

The low-velocity rear impact is common that can cause minor injuries like neck fractures, leg fractures, etc. Whereas a high-velocity crash can deform and rupture the gas tank.

(iii) Side impact

In a side impact, the vehicle strikes another vehicle from the left or right side. The injuries caused by this can be severe as the car has a thin metal wall and no other components are present to absorb the force of impact. Injuries like V-shaped laceration, fragments of glass in wounds, cervical spine fracture, fractured ribs, contusion, and explosive tearing of lungs can be seen.

(iv) Roll-over

In this type of impact, the car may suffer severe damage but surprisingly, the occupants will receive moderate impact as the crashing of different sides of the vehicle will absorb the forces of impact. In this type of impact, there is no specific injury pattern.

3. Motorcycle and cycle Injuries

An accident that might result in minor injuries with an automobile can cause death with a motorcycle. The common causes of motorcycle accidents are alcohol, drugs, and environmental factors.

Motorcycle and cycle Injuries

Primary injuries are common fractures of the tibia and fibula whereas secondary injuries are commonly skull, ribs, and cervical spine as well as contusions of the brain.

Pedal cycle injuries are common in India involving injuries to the head and chest. A unique injury seen among bicyclists is the stripping of the skin from the leg due to the limb being forced between the wheel spokes.

(B) Railway Injuries

Railway injuries are common in a country like India which has a wide railway network in the world and have an unmanned crossing, and open railway tracks.

When a body is hit by a train, it breaks into many pieces and is soiled by axle grease and dirt from the wheels on the track.

When passengers fall off the train, multiple injuries along with abrasion are seen.

There may be 'fail chest' along with traumatic asphyxia when the victim is crushed between the buffers of two bogies.

(C) Aircraft Injuries

Aircraft injuries are generally fatal and the chances of surviving an air crash are very less.

Immediate fire after an air crash will cause death due to burns.

The passengers may suffer leg injuries by being crushed against the seats in front.

Fractures of spines are also common, especially fracture of the thoracic spine.

Popular Posts

Conducting Polymers: Definition, Examples, Properties and Applications

Image
What are Conducting Polymers? As the name suggests organic polymers that conduct electricity are known as conducting polymers. They are also known as intrinsically conducting polymers (ICPs) and they have alternating single and double bonds along the polymer backbone (conjugated bonds) or that are composed of aromatic rings such as Phenylene, naphthalene, anthracene, pyrrole, and thiophene which are connected through carbon-carbon single bonds. Examples: Polyacetylene, Polypyrrole, Polyaniline, etc What is the reason behind conducting nature of these polymers? Conducting polymers comes in two forms that are doped conducting polymers and non-doped conducting polymers. The conductivity of non-doped conjugated polymers is due to the existence of a conductivity band similar to a metal. In a conjugated polymer, three of the four valence electrons form strong sigma bonds through sp² hybridization where electrons are strongly localized. The remaining unpaired electron of each carbon atom re
Read more

Crime Scene: Definition, Types and Characteristics

Image
What is a Crime Scene ? A place where the crime is committed or where the maximum physical evidence related to crime is found is known as a crime scene. A crime scene is a starting point of the investigation which provides information about the suspect and the victim. This helps to reconstruct the crime and fast resolution of the case. It is noted that the crime scene is not limited to a single place but may extend to a wider area depending upon the nature of the crime committed. For example, In a murder case where murder is done at one place and the body is disposed on another place. In this case, we have two crime scenes that give information about the crime. Types of Crime Scene Based on evidence found on the crime scene: 1. Primary Crime Scene The crime scene where the actual crime occurred or where more usable pieces of evidence were found is known as the primary crime scene. For example, A murder scene, theft, assault, etc. 2. Secondary Crime Scene The crime scene which is some
Read more

Documentation of the Crime Scene: Step by Step

Image
What is documentation of the crime scene and Why it is done? After securing the crime scene, the next most important step is documentation of the crime scene because documentation permanently records the crime scene and its physical evidence. Documentation should be done without any wastage of time as the scene and its evidence may get altered over time. The documentation should be done innovatively and the originality of the crime scene should be maintained and documentation should not have pauses or breaks, it should remain constant till the whole crime scene is documented. There are four main tasks of documentation that is note-making, photography, videography , and sketching . It should be noted that all four tasks are necessary and none is a substitute for another. For example, notes are not substitutes for photography, video is not a substitute for sketching, etc. Following are the sequence for crime scene documentation: 1. Note making Documentation of crime scene in the f
Read more