U.V-Visible spectroscopy: Instrumentation, Working and Applications

What is U.V-Visible spectroscopy?

U.V-Visible spectroscopy is absorption spectroscopy that deals with the recording of the absorption of electromagnetic radiation of the U.V and Visible regions of the electromagnetic spectrum. The U.V-region ranges from 200-400 nm whereas the visible region ranges from 400 to 800 nm. 

So, we can say that U.V-Visible spectroscopy utilizes a 200-800 nm range for working. This technique is widely used for detecting the presence and elucidating the nature of the conjugated multiple bonds and aromatic rings.

Instrumentation of U.V-Visible spectroscopy

UV Visible Spectroscopy Instrumentation

1. Radiation source

Hydrogen-discharge lamp is the most commonly used source of radiation in the U.V region (200-400 nm) whereas a deuterium-discharge lamp is used when more intensity (3-5 times) is desired. A tungsten-filament lamp is used when absorption in the Visible region (400-800 nm) is to be determined.

2. Monochromator

It helps to separate the radiations into separate wavelengths that are it only allow to pass a specific wavelength through it. Monochromators are generally made up of prism or grating which is made up of quartz. This is so because quartz does not absorb the radiations thus ensuring no loss of intensity and precise results.

3. Beam separator

As the name suggests, beam separators help to separate the single radiation into two different paths/chambers that is the reference chamber and the sample chamber. The former is called the reference beam and the latter is known as the sample beam.

4. Detectors

Detectors have photocells or photomultiplier tubes that generate a voltage proportional to the radiation energy that strikes them.

5. Amplifier

The spectrophotometer has a balancing electronic amplifier that subtracts the absorption of the solvent from that of the solution electronically.

6. Recorder

A recorder automatically records the spectrum as a plot of the wavelengths of absorbed radiations against absorbance (A) or molar absorptivity (e).

Working of U.V-Visible spectroscopy

When the U.V-Visible range electromagnetic radiation is emitted by the source, it passes through a monochromator which separates the electromagnetic radiations into separate radiations of different wavelengths. 

Then the desired wavelength electromagnetic radiations components are passed through a beam separator which divides the radiations into two chambers that is reference chamber containing reference sample and sample chamber containing actual sample which is to be analyzed. 

Then, the radiations penetrate both the samples, and some radiations are absorbed by the sample while some different wavelength is transmitted without any absorbance. These transmitted radiations fall on the amplifier which subtracts the absorption of the solvent from that of the solution. Then finally, the transmitted electromagnetic radiations fall on the detector then recorded by a recorder.

The most important thing is that the U.V-Visible spectrometer does not plot the graph between the transmittance and wavelength instead it plots the graph between absorbance and the wavelength because it is easy for the expert to analyze the graph as it is linear and not inverted. 

This is done by taking the log value to transmitted light and incident light as stated by the beers-lambert law that is

Beers lambert law

Application of U.V-Visible spectroscopy

1. Detection of functional groups

U.V-Visible spectroscopy helps to determine the presence or absence of a functional group in a compound. The absorption of particular wavelength radiation confirms the presence of that group.

2. Detection of the extent of conjugation

U.V-Visible spectroscopy helps to determine the extent of conjugation in compounds, especially in polyenes. This is confirmed by the increase in double bonds, the absorption shift towards the longer wavelength.

3. Identification of unknown compounds

An unknown compound can be identified with the help of U.V-Visible spectroscopy. If the spectrum of an unknown compound is compared with the spectrum of a reference compound and both spectra coincide then it confirms the identification of the unknown compound.

Popular Posts

Conducting Polymers: Definition, Examples, Properties and Applications

Image
What are Conducting Polymers? As the name suggests organic polymers that conduct electricity are known as conducting polymers. They are also known as intrinsically conducting polymers (ICPs) and they have alternating single and double bonds along the polymer backbone (conjugated bonds) or that are composed of aromatic rings such as Phenylene, naphthalene, anthracene, pyrrole, and thiophene which are connected through carbon-carbon single bonds. Examples: Polyacetylene, Polypyrrole, Polyaniline, etc What is the reason behind conducting nature of these polymers? Conducting polymers comes in two forms that are doped conducting polymers and non-doped conducting polymers. The conductivity of non-doped conjugated polymers is due to the existence of a conductivity band similar to a metal. In a conjugated polymer, three of the four valence electrons form strong sigma bonds through sp² hybridization where electrons are strongly localized. The remaining unpaired electron of each carbon atom re
Read more

Crime Scene: Definition, Types and Characteristics

Image
What is a Crime Scene ? A place where the crime is committed or where the maximum physical evidence related to crime is found is known as a crime scene. A crime scene is a starting point of the investigation which provides information about the suspect and the victim. This helps to reconstruct the crime and fast resolution of the case. It is noted that the crime scene is not limited to a single place but may extend to a wider area depending upon the nature of the crime committed. For example, In a murder case where murder is done at one place and the body is disposed on another place. In this case, we have two crime scenes that give information about the crime. Types of Crime Scene Based on evidence found on the crime scene: 1. Primary Crime Scene The crime scene where the actual crime occurred or where more usable pieces of evidence were found is known as the primary crime scene. For example, A murder scene, theft, assault, etc. 2. Secondary Crime Scene The crime scene which is some
Read more

Documentation of the Crime Scene: Step by Step

Image
What is documentation of the crime scene and Why it is done? After securing the crime scene, the next most important step is documentation of the crime scene because documentation permanently records the crime scene and its physical evidence. Documentation should be done without any wastage of time as the scene and its evidence may get altered over time. The documentation should be done innovatively and the originality of the crime scene should be maintained and documentation should not have pauses or breaks, it should remain constant till the whole crime scene is documented. There are four main tasks of documentation that is note-making, photography, videography , and sketching . It should be noted that all four tasks are necessary and none is a substitute for another. For example, notes are not substitutes for photography, video is not a substitute for sketching, etc. Following are the sequence for crime scene documentation: 1. Note making Documentation of crime scene in the f
Read more